W3C

HTML 5.3

Editor’s Draft,

4.5. Text-level semantics

4.5.1. The a element

Categories:
Flow content.
Phrasing content.
If the element has an href attribute: Interactive content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Transparent, but there must be no interactive content or a element descendants.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
href - Address of the hyperlink
target - Default browsing context for hyperlink navigation and §4.10.21 Form submission
download - Indicates to download the linked resource instead of navigating to it. If the attribute has a set value, change the resource’s proposed filename to the set value.
rel — Relationship of this document (or subsection/topic) to the destination resource
revReverse link relationship of the destination resource to this document (or subsection/topic)
hreflang - Language of the linked resource
type - Hint for the type of the referenced resource
referrerpolicy - Referrer policy for fetches initiated by the element
Allowed ARIA role attribute values:
If href is set: link (default - do not set), button, checkbox, menuitem, menuitemcheckbox, menuitemradio, option, radio, switch, tab or treeitem
If no href is set: Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
interface HTMLAnchorElement : HTMLElement {
  attribute DOMString target;
  attribute DOMString download;
  attribute DOMString rel;
  attribute DOMString rev;
  [SameObject, PutForwards=value] readonly attribute DOMTokenList relList;
  attribute DOMString hreflang;
  attribute DOMString type;
  attribute DOMString text;
  attribute DOMString referrerPolicy;
};
HTMLAnchorElement implements HTMLHyperlinkElementUtils;
DPub Roles:
doc-backlink, doc-biblioref, doc-glossref or doc-noteref

If the a element has an href attribute, then it represents a hyperlink (a hypertext anchor) labeled by its contents.

If the a element has no href attribute, then the element represents a placeholder for where a link might otherwise have been placed, if it had been relevant, consisting of just the element’s contents.

The target, download, rel, rev, hreflang, type, and referrerpolicy attributes must be omitted if the href attribute is not present.

If a site uses a consistent navigation toolbar on every page, then the link that would normally link to the page itself could be marked up using an a element:

<nav>
  <ul>
    <li> <a href="/">Home</a> </li>
    <li> <a href="/news">News</a> </li>
    <li> <a>Examples</a> </li>
    <li> <a href="/legal">Legal</a> </li>
  </ul>
</nav>

The href, target, download, and referrerpolicy attributes affect what happens when users follow hyperlinks or download hyperlinks created using the a element. The rel, rev, hreflang, and type attributes may be used to indicate to the user the likely nature of the target resource before the user follows the link.

The activation behavior of a elements that create hyperlinks is to run the following steps:

  1. If the a element’s Document is not fully active, then abort these steps.

  2. If either the a element has a download attribute and the algorithm is not allowed to show a popup, or the element’s target attribute is present and applying the rules for choosing a browsing context given a browsing context name, using the value of the target attribute as the browsing context name, would result in there not being a chosen browsing context, then run these substeps:

    1. If there is an entry settings object, throw an InvalidAccessError exception.

    2. Abort these steps without following the hyperlink.

  3. If the target of the click event is an img element with an ismap attribute specified, then server-side image map processing must be performed, as follows:

    1. If the click event was a real pointing-device-triggered click event on the img element, then let x be the distance in CSS pixels from the left edge of the image to the location of the click, and let y be the distance in CSS pixels from the top edge of the image to the location of the click. Otherwise, let x and y be zero.

    2. Let hyperlink suffix be a U+003F QUESTION MARK character, the value of x expressed as a base-ten integer using ASCII digits, a U+002C COMMA character (,), and the value of y expressed as a base-ten integer using ASCII digits.

  4. Finally, the user agent must follow the hyperlink or download the hyperlink created by the a element, as determined by the download attribute and any expressed user preference, passing hyperlink suffix, if the steps above defined it.

a . text
Same as textContent.

The IDL attributes download, target, rel, rev, hreflang, and type, must reflect the respective content attributes of the same name.

The IDL attribute relList must reflect the rel content attribute.

The IDL attribute referrerPolicy must reflect the referrerpolicy content attribute, limited to only known values.

The text IDL attribute, on getting, must return the same value as the textContent IDL attribute on the element, and on setting, must act as if the textContent IDL attribute on the element had been set to the new value.


The a element also supports the HTMLHyperlinkElementUtils interface. [URL]

When the element is created, and whenever the element’s href content attribute is set, changed, or removed, the user agent must invoke the element’s HTMLHyperlinkElementUtils interface’s set the input algorithm with the value of the href content attribute, if any, or the empty string otherwise, as the given value.

The element’s HTMLHyperlinkElementUtils interface’s get the base algorithm must simply return the document base URL.

The element’s HTMLHyperlinkElementUtils interface’s query encoding is the document’s character encoding.

When the element’s HTMLHyperlinkElementUtils interface invokes its update steps with a string value, the user agent must set the element’s href content attribute to the string value.

The a element may be wrapped around entire paragraphs, lists, tables, and so forth, even entire sections, so long as there is no interactive content within (e.g., buttons or other links). This example shows how this can be used to make an entire advertising block into a link:
<aside class="advertising">
  <h2>Advertising</h2>
  <a href="https://ad.example.com/?adid=1929&amp;pubid=1422">
    <section>
      <h3>Mellblomatic 9000!</h3>
      <p>Turn all your widgets into mellbloms!</p>
      <p>Only $9.99 plus shipping and handling.</p>
    </section>
  </a>
  <a href="https://ad.example.com/?adid=375&amp;pubid=1422">
    <section>
      <h3>The Mellblom Browser</h3>
      <p>Web browsing at the speed of light.</p>
      <p>No other browser goes faster!</p>
    </section>
  </a>
</aside>

4.5.2. The em element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The em element represents stress emphasis of its contents.

The level of stress that a particular piece of content has is given by its number of ancestor em elements.

The placement of stress emphasis changes the meaning of the sentence. The element thus forms an integral part of the content. The precise way in which stress is used in this way depends on the language.

These examples show how changing the stress emphasis changes the meaning. First, a general statement of fact, with no stress:
<p>Cats are cute animals.</p>

By emphasizing the first word, the statement implies that the kind of animal under discussion is in question (maybe someone is asserting that dogs are cute):

<p><em>Cats</em> are cute animals.</p>

Moving the stress to the verb, one highlights that the truth of the entire sentence is in question (maybe someone is saying cats are not cute):

<p>Cats <em>are</em> cute animals.</p>

By moving it to the adjective, the exact nature of the cats is reasserted (maybe someone suggested cats were mean animals):

<p>Cats are <em>cute</em> animals.</p>

Similarly, if someone asserted that cats were vegetables, someone correcting this might emphasize the last word:

<p>Cats are cute <em>animals</em>.</p>

By emphasizing the entire sentence, it becomes clear that the speaker is fighting hard to get the point across. This kind of stress emphasis also typically affects the punctuation, hence the exclamation mark here.

<p><em>Cats are cute animals!</em></p>

Anger mixed with emphasizing the cuteness could lead to markup such as:

<p><em>Cats are <em>cute</em> animals!</em></p>
The em element isn’t a generic "italics" element. Sometimes, text is intended to stand out from the rest of the paragraph, as if it was in a different mood or voice. For this, the i element is more appropriate.

The em element also isn’t intended to convey importance; for that purpose, the strong element is more appropriate.

4.5.3. The strong element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The strong element represents strong importance, seriousness, or urgency for its contents.

Importance: The strong element can be used in a heading, caption, or paragraph to distinguish the part that really matters from other parts that might be more detailed, more jovial, or merely boilerplate.

For example, the first word of the previous paragraph is marked up with strong to distinguish it from the more detailed text in the rest of the paragraph.

Seriousness: The strong element can be used to mark up a warning or caution notice.

Urgency: The strong element can be used to denote contents that the user needs to see sooner than other parts of the document.

The relative level of importance of a piece of content is given by its number of ancestor strong elements; each strong element increases the importance of its contents.

Changing the importance of a piece of text with the strong element does not change the meaning of the sentence.

Here, the word "chapter" and the actual chapter number are mere boilerplate, and the actual name of the chapter is marked up with strong:
<h1>Chapter 1: <strong>The Praxis</strong></h1>

In the following example, the name of the diagram in the caption is marked up with strong, to distinguish it from boilerplate text (before) and the description (after):

<figcaption>
  Figure 1. <strong>Ant colony dynamics</strong>. The ants in this colony are affected by the heat source (upper left) and the food source (lower right).
</figcaption>

In this example, the heading is really "Flowers, Bees, and Honey", but the author has added a light-hearted addition to the heading. The strong element is thus used to mark up the first part to distinguish it from the latter part.

<h1><strong>Flowers, Bees, and Honey</strong> and other things I don’t understand</h1>
Here is an example of a warning notice in a game, with the various parts marked up according to how important they are:
<p>
  <strong>Warning.</strong> This dungeon is dangerous.
  <strong>Avoid the ducks.</strong> Take any gold you find.
  <strong><strong>Do not take any of the diamonds</strong>, they are explosive and <strong>will destroy anything within ten meters.</strong></strong> You have been warned.
</p>
In this example, the strong element is used to denote the part of the text that the user is intended to read first.
<p>Welcome to Remy, the reminder system.</p>
<p>Your tasks for today:</p>
<ul>
  <li><strong>Turn off the oven.</strong></li>
  <li>Put out the trash.</li>
  <li>Do the laundry.</li>
</ul>

4.5.4. The small element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The small element represents side comments such as small print.

Small print typically features disclaimers, caveats, legal restrictions, or copyrights. Small print is also sometimes used for attribution, or for satisfying licensing requirements.

The small element does not "de-emphasize" or lower the importance of text emphasized by the em element or marked as important with the strong element. To mark text as not emphasized or important, simply do not mark it up with the em or strong elements respectively.

The small element should not be used for extended spans of text, such as multiple paragraphs, lists, or sections of text. It is only intended for short runs of text. The text of a page listing terms of use, for instance, would not be a suitable candidate for the small element: in such a case, the text is not a side comment, it is the main content of the page.

In this example, the small element is used to indicate that value-added tax is not included in a price of a hotel room:
<dl>
  <dt>Single room</dt>
  <dd>199 € <small>breakfast included, VAT not included</small></dd>
  <dt>Double room</dt>
  <dd>239 € <small>breakfast included, VAT not included</small></dd>
</dl>
In this second example, the small element is used for a side comment in an article.
<p>Example Corp today announced record profits for the second quarter <small>(Full Disclosure: Foo News is a subsidiary of Example Corp)</small>, leading to speculation about a third quarter merger with Demo Group.</p>

This is distinct from a sidebar, which might be multiple paragraphs long and is removed from the main flow of text. In the following example, we see a sidebar from the same article. This sidebar also has small print, indicating the source of the information in the sidebar.

<aside>
  <h1>Example Corp</h1>
  <p>This company mostly creates small software and Web sites.</p>
  <p>The Example Corp company mission is "To provide entertainment and news on a sample basis".</p>
  <p><small>Information obtained from <a href="https://example.com/about.html">example.com</a> home page.</small></p>
</aside>

In this last example, the small element is marked as being important small print.

<p><strong><small>Continued use of this service will result in a kiss.</small></strong></p>

4.5.5. The s element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The s element represents contents that are no longer accurate or no longer relevant.

The s element is not appropriate when indicating document edits; to mark a span of text as having been removed from a document, use the del element.

In this example a recommended retail price has been marked as no longer relevant as the product in question has a new sale price.
<p>Buy our Iced Tea and Lemonade!</p>
<p><s>Recommended retail price: $3.99 per bottle</s></p>
<p><strong>Now selling for just $2.99 a bottle!</strong></p>

4.5.6. The cite element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The cite element represents a reference to a creative work. It must include the title of the work or the name of the author (person, people or organization) or an URL reference, or a reference in abbreviated form as per the conventions used for the addition of citation metadata.

Creative works include a book, a paper, an essay, a poem, a score, a song, a script, a film, a TV show, a game, a sculpture, a painting, a theatre production, a play, an opera, a musical, an exhibition, a legal case report, a computer program, , a web site, a web page, a blog post or comment, a forum post or comment, a tweet, a written or oral statement, etc.

Here is an example of the author of a quote referenced using the cite element:
<p>
  In the words of <cite>Charles Bukowski</cite> -
  <q>An intellectual says a simple thing in a hard way. An artist says a hard thing in a simple way.</q>
</p>
This second example identifies the author of a tweet by referencing the authors name using the cite element:
<blockquote class="twitter-tweet">
  <p>This is for everyone #london2012 #oneweb #openingceremony @webfoundation @w3c</p>
  <cite>— Tim Berners-Lee (@timberners_lee) <a href="https://twitter.com/timberners_lee/status/228960085672599552">27 July 2012</a></cite>
</blockquote>
In this example the cite element is used to reference the title of a work in a bibliography:
<p><cite>Universal Declaration of Human Rights</cite>, United Nations, December 1948. Adopted by General Assembly resolution 217 A (III).</p>
In this example the cite element is used to reference the title of a television show:
<p>Who is your favorite doctor (in <cite>Doctor Who</cite>)?</p>
A very common use for the cite element is to identify the author of a comment in a blog post or forum, as in this example:
<article id="comment-1">
  Comment by <cite><a href="https://example.net">Elizabeth Bennet</a></cite>
  <time datetime="2013-08-19T16:01">August 19th, 2013 at 4:01 pm</time>
  <p>There is a stubbornness about me that never can bear to be frightened at the will of others. My courage always rises at every attempt to intimidate me</p>
</article>
Another common use for the cite element is to reference the URL of a search result, as in this example:
<div id="resultStats">About 416,000,000 results 0.33 seconds) </div>

  <p><a href="https://www.w3.org/html/wg/">W3C <i>HTML Working Group</i></a></p>
  <p><cite>www.w3.org/<b>html</b>/wg/</cite></p>
  <p>15 Apr 2013 - The <i>HTML Working Group</i> is currently chartered to continue its work through 31 December 2014. A Plan 2014 document published by the...</p>
...
Where the cite element is used to identify an abbreviated reference such as Ibid. it is suggested that this reference be linked to the base reference:
<article>
  <h2>Book notes</h2>
  <blockquote>"Money is the real cause of poverty,"
    <footer>
      <cite id="baseref">The Ragged-Trousered Philanthropists, page 89.</cite>
    </footer>
  </blockquote>
  <blockquote>"Money is the cause of poverty because it is the device by which those who are too lazy to work are enabled to rob the workers of the fruits of their labour."
    <a href="#baseref"><cite>Ibid.</cite></a>
  </blockquote>
</article>

A citation is not a quote (for which the q element is appropriate).

This is incorrect usage, because cite is not for quotes:
<p><cite>This is wrong!, said Hillary.</cite> is a quote from the popular daytime TV drama When Ian became Hillary.</p>

This is an example of the correct usage:

<p><q>This is correct, said Hillary.</q> is a quote from the popular daytime TV drama <cite>When Ian became Hillary</cite>.</p>

4.5.7. The q element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
cite - Link to the source of the quotation.
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes.
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLQuoteElement.

The q element represents some phrasing content quoted from another source.

Quotation punctuation (such as quotation marks) that is quoting the contents of the element must not appear immediately before, after, or inside q elements; they will be inserted into the rendering by the user agent.

Content inside a q element must be quoted from another source, whose address, if it has one, may be cited in the cite attribute. The source may be fictional, as when quoting characters in a novel or screenplay.

If the cite attribute is present, it must be a valid URL potentially surrounded by spaces. To obtain the corresponding citation link, the value of the attribute must be parsed relative to the element’s node document. User agents may allow users to follow such citation links, but they are primarily intended for private use (e.g., by server-side scripts collecting statistics about a site’s use of quotations), not for readers.

The q element must not be used in place of quotation marks that do not represent quotes; for example, it is inappropriate to use the q element for marking up sarcastic statements.

The use of q elements to mark up quotations is entirely optional; using explicit quotation punctuation without q elements is just as correct.

Here is a simple example of the use of the q element:
<p>The man said <q>Things that are impossible just take longer</q>. I disagreed with him.</p>
Here is an example with both an explicit citation link in the q element, and an explicit citation outside:
<p>The W3C page <cite>About W3C</cite> says the W3C’s mission is <q cite="https://www.w3.org/Consortium/">To lead the World Wide Web to its full potential by developing protocols and guidelines that ensure long-term growth for the Web</q>. I fully agree with this mission.</p>
In the following example, the quotation itself contains a quotation:
<p>In <cite>Example One</cite>, he writes <q>The man said <q>Things that are impossible just take longer</q>. I disagreed with him</q>. Well, I disagree even more!</p>
In the following example, quotation marks are used instead of the q element:
<p>His best argument was ❝I disagree❞, which I thought was laughable.</p>
In the following example, there is no quote — the quotation marks are used to name a word. Use of the q element in this case would be inappropriate.
<p>The word "ineffable" could have been used to describe the disaster resulting from the campaign’s mismanagement.</p>

4.5.8. The dfn element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content, but there must be no dfn element descendants.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Also, the title attribute has special semantics on this element.
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The dfn element represents the defining instance of a term. The term-description group, p, li or section element that is the nearest ancestor of the dfn element must also contain the definition(s) for the term given by the dfn element.

Defining term: If the dfn element has a title attribute, then the exact value of that attribute is the term being defined. Otherwise, if it contains exactly one element child node and no child Text nodes, and that child element is an abbr element with a title attribute, then the exact value of that attribute is the term being defined. Otherwise, it is the exact textContent of the dfn element that gives the term being defined.

If the title attribute of the dfn element is present, then it must contain only the term being defined.

The title attribute of ancestor elements does not affect dfn elements.

An a element that links to a dfn element represents an instance of the term defined by the dfn element.

In the following fragment, the term "Garage Door Opener" is first defined in the first paragraph, then used in the second. In both cases, its abbreviation is what is actually displayed.
<p>The <dfn><abbr title="Garage Door Opener">GDO</abbr></dfn> is a device that allows off-world teams to open the iris.</p>
<!-- ... later in the document: -->
<p>Teal’c activated his <abbr title="Garage Door Opener">GDO</abbr> and so Hammond ordered the iris to be opened.</p>

With the addition of an a element, the reference can be made explicit:

<p>The <dfn id="gdo"><abbr title="Garage Door Opener">GDO</abbr></dfn> is a device that allows off-world teams to open the iris.</p>
<!-- ... later in the document: -->
<p>Teal’c activated his <a href="#gdo"><abbr title="Garage Door Opener">GDO</abbr></a> and so Hammond ordered the iris to be opened.</p>

4.5.9. The abbr element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Also, the title attribute has special semantics on this element.
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The abbr element represents an abbreviation or acronym, optionally with its expansion. The title attribute may be used to provide an expansion of the abbreviation. The attribute, if specified, must contain an expansion of the abbreviation, and nothing else.

The paragraph below contains an abbreviation marked up with the abbr element. This paragraph defines the term "Web Hypertext Application Technology Working Group".
<p>The <dfn id="w3c"><abbr title="World Wide Web Consortium">W3C</abbr></dfn> is the main international standards organization for the World Wide Web.</p>

An alternative way to write this would be:

<p>The <dfn id="w3c">World Wide Web Consortium</dfn> (<abbr title="World Wide Web Consortium">W3C</abbr>) is the main international standards organization for the World Wide Web.</p>
This paragraph has two abbreviations. Notice how only one is defined; the other, with no expansion associated with it, does not use the abbr element.
<p>The <abbr title="World Wide Web Consortium">W3C</abbr> started working on HTML in 1994.</p>
This paragraph links an abbreviation to its definition.
<p>The <a href="#w3c"><abbr title="World Wide Web Consortium">W3C</abbr></a> has members all over the world.</p>
This paragraph marks up an abbreviation without giving an expansion, possibly as a hook to apply styles for abbreviations (e.g., smallcaps).
<p>There are several <abbr>W3C</abbr> offices around the world.</p>

If an abbreviation is pluralized, the expansion’s grammatical number (plural vs singular) must match the grammatical number of the contents of the element.

Here the plural is outside the element, so the expansion is in the singular:
<p>Two <abbr title="Working Group">WG</abbr>s worked on this specification: the <abbr>CSSWG</abbr> and the <abbr>ARIA</abbr>.</p>

Here the plural is inside the element, so the expansion is in the plural:

<p>Two <abbr title="Working Groups">WGs</abbr> worked on this specification: the <abbr>CSSWG</abbr> and the <abbr>ARIA</abbr>.</p>

Abbreviations do not have to be marked up using this element. It is expected to be useful in the following cases:

Providing an expansion in a title attribute once will not necessarily cause other abbr elements in the same document with the same contents but without a title attribute to behave as if they had the same expansion. Every abbr element is independent.

4.5.10. The ruby element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
See prose.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The ruby element allows one or more spans of phrasing content to be marked with ruby annotations. Ruby annotations are short runs of text presented alongside base text, primarily used in East Asian typography as a guide for pronunciation or to include other annotations. In Japanese, this form of typography is also known as furigana. Ruby text can appear on either side, and sometimes both sides, of the base text, and it is possible to control its position using CSS. A more complete introduction to ruby can be found in the Use Cases & Exploratory Approaches for Ruby Markup document as well as in CSS Ruby. [RUBY-UC] [CSS3-RUBY]

The content model of ruby elements consists of one or more of the following sequences:

  1. One or more phrasing content nodes or rb elements.

  2. One or more rt or rtc elements, each of which either immediately preceded or followed by an rp elements.

The ruby, rb, rtc, and rt elements can be used for a variety of kinds of annotations, including in particular (though by no means limited to) those described below. For more details on Japanese Ruby in particular, and how to render Ruby for Japanese, see Requirements for Japanese Text Layout. [JLREQ] The rp element can be used as fallback content when ruby rendering is not supported.

Mono-ruby for individual base characters

Annotations (the ruby text) are associated individually with each ideographic character (the base text). In Japanese this is typically hiragana or katakana characters used to provide readings of kanji characters.

<ruby>base<rt>annotation</ruby>

When no rb element is used, the base is implied, as above. But you can also make it explicit. This can be useful notably for styling, or when consecutive bases are to be treated as a group, as in the jukugo ruby example further down.

<ruby><rb>base<rt>annotation</ruby>

In the following example, notice how each annotation corresponds to a single base character.

<ruby><rt></rt></ruby><ruby><rt>ほん</rt></ruby>
<ruby><rt></rt></ruby><ruby><rt></rt></ruby> いた
<ruby><rt>さく</rt></ruby><ruby><rt>ぶん</rt></ruby>です。

Ruby text interspersed in regular text provides structure akin to the following image:

An example of ruby text mixed up with regular text.

This example can also be written as follows, using one ruby element with two segments of base text and two annotations (one for each) rather than two back-to-back ruby elements each with one base text segment and annotation (as in the markup above):

<ruby><rt></rt><rt>ほん</rt><rt></rt></ruby><ruby><rt></rt></ruby>
いた<ruby><rt>さく</rt><rt>ぶん</rt></ruby>です。
Group ruby

Group ruby is often used where phonetic annotations don’t map to discreet base characters, or for semantic glosses that span the whole base text. For example, the word "today" is written with the characters 今日, literally "this day". But it’s pronounced きょう (kyou), which can’t be broken down into a "this" part and a "day" part. In typical rendering, you can’t split text that is annotated with group ruby; it has to wrap as a single unit onto the next line. When a ruby text annotation maps to a base that is comprised of more than one character, then that base is grouped.

The following group ruby:

Group ruby example with きょう annotating 今日

Can be marked up as follows:

<ruby>今日<rt>きょう</ruby>
Jukugo ruby

Jukugo refers to a Japanese compound noun, i.e., a word made up of more than one kanji character. Jukugo ruby is a term that is used not to describe ruby annotations over jukugo text, but rather to describe ruby with a behavior slightly different from mono or group ruby. Jukugo ruby is similar to mono ruby, in that there is a strong association between ruby text and individual base characters, but the ruby text is typically rendered as grouped together over multiple ideographs when they are on the same line.

The distinction is captured in this example:

Example of jukugo ruby

Which can be marked up as follows:

<ruby><rb><rb><rt><rt><rt>きょう</ruby>

In this example, each rt element is paired with its respective rb element, the difference with an interleaved rb/rt approach being that the sequences of both base text and ruby annotations are implicitly placed in common containers so that the grouping information is captured.

For more details on Jukugo Ruby rendering, see Appendix F in the Requirements for Japanese Text Layout and Use Case C: Jukugo ruby in the Use Cases & Exploratory Approaches for Ruby Markup. [JLREQ] [RUBY-UC]

Inline ruby

In some contexts, for instance when the font size or line height are too small for ruby to be readable, it is desirable to inline the ruby annotation such that it appears in parentheses after the text it annotates. This also provides a convenient fallback strategy for user agents that do not support rendering ruby annotations.

Inlining takes grouping into account. For example, Tokyo is written with two kanji characters, 東, which is pronounced とう, and 京, which is pronounced きょう. Each base character should be annotated individually, but the fallback should be 東京(とうきょう) not 東(とう)京(きょう). This can be marked up as follows:

<ruby><rb><rt>とう<rt>きょう</ruby>

Note that the above markup will enable the usage of parentheses when inlining for browsers that support ruby layout, but for those that don’t it will fail to provide parenthetical fallback. This is where the rp element is useful. It can be inserted into the above example to provide the appropriate fallback when ruby layout is not supported:

<ruby><rb><rp>(<rt>とう<rt>きょう<rp>)</ruby>
Text with both phonetic and semantic annotations (double-sided ruby)

Sometimes, ruby can be used to annotate a base twice.

In the following example, the Chinese word for San Francisco (旧金山, i.e., "old gold mountain") is annotated both using pinyin to give the pronunciation, and with the original English.

San Francisco in Chinese, with both pinyin and the original English as annotations.

Which is marked up as follows:

<ruby><rb><rb><rb><rt>jiù<rt>jīn<rt>shān<rtc>San Francisco</ruby>

In this example, a single base run of three base characters is annotated with three pinyin ruby text segments in a first (implicit) container, and an rtc element is introduced in order to provide a second single ruby text annotation being the city’s English name.

We can also revisit our jukugo example above with 上手 ("skill") to show how it can be annotation in both kana and romaji phonetics while at the same time maintaining the pairing to bases and annotation grouping information.

上手 ("skill") annotated in both kana and romaji, shown in both jukugo and mono styles.

Which is marked up as follows:

<ruby><rb><rb><rt>じよう<rt><rtc><rt>jou<rt>zu</ruby>

Text that is a direct child of the rtc element implicitly produces a ruby text segment as if it were contained in an rt element. In this contrived example, this is shown with some symbols that are given names in English and French with annotations intended to appear on either side of the base symbol.

<ruby><rt>Heart<rtc lang="fr">Cœur</rtc><rt>Shamrock<rtc lang="fr">Trèfle</rtc><rt>Star<rtc lang="fr">Étoile
</ruby>

Similarly, text directly inside a ruby element implicitly produces a ruby base as if it were contained in an rb element, and rt children of ruby are implicitly contained in an rtc container. In effect, the above example is equivalent (in meaning, though not in the DOM it produces) to the following:

<ruby>
  <rb></rb><rtc><rt>Heart</rt></rtc><rtc lang="fr"><rt>Cœur</rt></rtc>
  <rb></rb><rtc><rt>Shamrock</rt></rtc><rtc lang="fr"><rt>Trèfle</rt></rtc>
  <rb></rb><rtc><rt>Star</rt></rtc><rtc lang="fr"><rt>Étoile</rt></rtc>
</ruby>

Within a ruby element, content is parcelled into a series of ruby segments. Each ruby segment is described by:

Each ruby text container is described by zero or more ruby text annotations each of which is a DOM range that may contain phrasing content or an rt element, and an annotations range that is a range including all the annotations for that container. A ruby text container is also known (primarily in a CSS context) as a ruby annotation container.

Furthermore, a ruby element contains ignored ruby content. Ignored ruby content does not form part of the document’s semantics. It consists of some inter-element white space and rp elements, the latter of which are used for legacy user agents that do not support ruby at all.

The process of annotation pairing associates ruby annotations with ruby bases. Within each ruby segment, each ruby base in the ruby base container is paired with one ruby text annotation from the ruby text container, in order. If there are not enough ruby text annotations in a ruby annotation container, the last one is associated with any excess ruby bases. (If there are not any in the ruby annotation container, an anonymous empty one is assumed to exist.) If there are not enough ruby bases, any remaining ruby text annotations are assumed to be associated with empty, anonymous bases inserted at the end of the ruby base container.

Note that the terms ruby segment, ruby base, ruby text annotation, ruby text container, ruby base container, and ruby annotation container have their equivalents in CSS Ruby Module Level 3. [CSS3-RUBY]

Informally, the segmentation and categorization algorithm below performs a simple set of tasks. First it processes adjacent rb elements, text nodes, and non-ruby elements into a list of bases. Then it processes any number of rtc elements or sequences of rt elements that are considered to automatically map to an anonymous ruby text container. Put together these data items form a ruby segment as detailed in the data model above. It will continue to produce such segments until it reaches the end of the content of a given ruby element. The complexity of the algorithm below compared to this informal description stems from the need to support an author-friendly syntax and being mindful of inter-element white space.

At any particular time, the segmentation and categorization of content of a ruby element is the result that would be obtained from running the following algorithm:

  1. Let root be the ruby element for which the algorithm is being run.
  2. Let index be 0.
  3. Let ruby segments be an empty list.
  4. Let current bases be an empty list of DOM ranges.
  5. Let current bases range be null.
  6. Let current bases range start be null.
  7. Let current annotations be an empty list of DOM ranges.
  8. Let current annotations range be null.
  9. Let current annotations range start be null.
  10. Let current annotation containers be an empty list.
  11. Let current automatic base nodes be an empty list of DOM Nodes.
  12. Let current automatic base range start be null.
  13. Process a ruby child: If index is equal to or greater than the number of child nodes in root, then run the steps to commit a ruby segment, return ruby segments, and abort these steps.
  14. Let current child be the indexth node in root.
  15. If current child is not a Text node and is not an Element node, then increment index by one and jump to the step labelled process a ruby child.
  16. If current child is an rp element, then increment index by one and jump to the step labelled process a ruby child. (Note that this has the effect of including this element in any range that we are currently processing. This is done intentionally so that misplaced rp can be processed correctly; semantically they are ignored all the same.)
  17. If current child is an rt element, then run these substeps:
    1. Run the steps to commit an automatic base.
    2. Run the steps to commit the base range.
    3. If current annotations is empty, set current annotations range start to the value of index.
    4. Create a new DOM range whose start is the boundary point (root, index) and whose end is the boundary point (root, index plus one), and append it at the end of current annotations.
    5. Increment index by one and jump to the step labelled process a ruby child.
  18. If current child is an rtc element, then run these substeps:
    1. Run the steps to commit an automatic base.
    2. Run the steps to commit the base range.
    3. Run the steps to commit current annotations.
    4. Create a new ruby annotation container. It is described by the list of annotations returned by running the steps to process an rtc element and a DOM range whose start is the boundary point (root, index) and whose end is the boundary point (root, index plus one). Append this new ruby annotation container at the end of current annotation containers.
    5. Increment index by one and jump to the step labelled process a ruby child.
  19. If current child is a Text node and is inter-element white space, then run these substeps:
    1. If current annotations is not empty, increment index by one and jump to the step labelled process a ruby child.
    2. Run the following substeps:
      1. Let lookahead index be set to the value of index.
      2. Peek ahead: Increment lookahead index by one.
      3. If lookahead index is equal to or greater than the number of child nodes in root, then abort these substeps.
      4. Let peek child be the lookahead indexth node in root.
      5. If peek child is a Text node and is inter-element white space, then jump to the step labelled peek ahead.
      6. If peek child is an rt element, an rtc element, or an rp element, then set index to the value of lookahead index and jump to the step labelled process a ruby child.
  20. If current annotations is not empty or if current annotation containers is not empty, then run the steps to commit a ruby segment.
  21. If current child is an rb element, then run these substeps:
    1. Run the steps to commit an automatic base.
    2. If current bases is empty, then set current bases range start to the value of index.
    3. Create a new DOM range whose start is the boundary point (root, index) and whose end is the boundary point (root, index plus one), and append it at the end of current bases.
    4. Increment index by one and jump to the step labelled process a ruby child.
  22. If current automatic base nodes is empty, set current automatic base range start to the value of index.
  23. Append current child at the end of current automatic base nodes.
  24. Increment index by one and jump to the step labelled process a ruby child.

When the steps above say to commit a ruby segment, it means to run the following steps at that point in the algorithm:

  1. Run the steps to commit an automatic base.
  2. If current bases, current annotations, and current annotation containers are all empty, abort these steps.
  3. Run the steps to commit the base range.
  4. Run the steps to commit current annotations.
  5. Create a new ruby segment. It is described by a list of bases set to current bases, a base DOM range set to current bases range, and a list of ruby annotation containers that are the current annotation containers list. Append this new ruby segment at the end of ruby segments.
  6. Let current bases be an empty list.
  7. Let current bases range be null.
  8. Let current bases range start be null.
  9. Let current annotation containers be an empty list.

When the steps above say to commit the base range, it means to run the following steps at that point in the algorithm:

  1. If current bases is empty, abort these steps.
  2. If current bases range is not null, abort these steps.
  3. Let current bases range be a DOM range whose start is the boundary point (root, current bases range start) and whose end is the boundary point (root, index).

When the steps above say to commit current annotations, it means to run the following steps at that point in the algorithm:

  1. If current annotations is not empty and current annotations range is null let current annotations range be a DOM range whose start is the boundary point (root, current annotations range start) and whose end is the boundary point (root, index).
  2. If current annotations is not empty, create a new ruby annotation container. It is described by an annotations list set to current annotations and a range set to current annotations range. Append this new ruby annotation container at the end of current annotation containers.
  3. Let current annotations be an empty list of DOM ranges.
  4. Let current annotations range be null.
  5. Let current annotations range start be null.

When the steps above say to commit an automatic base, it means to run the following steps at that point in the algorithm:

  1. If current automatic base nodes is empty, abort these steps.
  2. If current automatic base nodes contains nodes that are not Text nodes, or Text nodes that are not inter-element white space, then run these substeps:
    1. It current bases is empty, set current bases range start to the value of current automatic base range start.
    2. Create a new DOM range whose start is the boundary point (root, current automatic base range start) and whose end is the boundary point (root, index), and append it at the end of current bases.
  3. Let current automatic base nodes be an empty list of DOM Nodes.
  4. Let current automatic base range start be null.

4.5.11. The rb element

Categories:
None.
Contexts in which this element can be used:
As a child of a ruby element.
Content model:
Phrasing content.
Tag omission in text/html:
An rb element’s end tag may be omitted if the rb element is immediately followed by an rb, rt, rtc or rp element, or if there is no more content in the parent element.
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The rb element marks the base text component of a ruby annotation. When it is the child of a ruby element, it doesn’t represent anything itself, but its parent ruby element uses it as part of determining what it represents.

An rb element that is not a child of a ruby element represents the same thing as its children.

4.5.12. The rt element

Categories:
None.
Contexts in which this element can be used:
As a child of a ruby or of an rtc element.
Content model:
Phrasing content.
Tag omission in text/html:
An rt element’s end tag may be omitted if the rt element is immediately followed by an rb, rt, rtc or rp element, or if there is no more content in the parent element.
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The rt element marks the ruby text component of a ruby annotation. When it is the child of a ruby element or of an rtc element that is itself the child of a ruby element, it doesn’t represent anything itself, but its ancestor ruby element uses it as part of determining what it represents.

An rt element that is not a child of a ruby element or of an rtc element that is itself the child of a ruby element represents the same thing as its children.

4.5.13. The rtc element

Categories:
None.
Contexts in which this element can be used:
As a child of a ruby element.
Content model:
Phrasing content, rt, or rp elements.
Tag omission in text/html:
An rtc element’s end tag may be omitted if the rtc element is immediately followed by an rb or rtc element, or if there is no more content in the parent element.
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The rtc element marks a ruby text container for ruby text components in a ruby annotation. When it is the child of a ruby element it doesn’t represent anything itself, but its parent ruby element uses it as part of determining what it represents.

An rtc element that is not a child of a ruby element represents the same thing as its children.

When an rtc element is processed as part of the segmentation and categorization of content for a ruby element, the following algorithm defines how to process an rtc element:

  1. Let root be the rtc element for which the algorithm is being run.
  2. Let index be 0.
  3. Let annotations be an empty list of DOM ranges.
  4. Let current automatic annotation nodes be an empty list of DOM nodes.
  5. Let current automatic annotation range start be null.
  6. Process an rtc child: If index is equal to or greater than the number of child nodes in root, then run the steps to commit an automatic annotation, return annotations, and abort these steps.
  7. Let current child be the indexth node in root.
  8. If current child is an rt element, then run these substeps:
    1. Run the steps to commit an automatic annotation.
    2. Create a new DOM range whose start is the boundary point (root, index) and whose end is the boundary point (root, index plus one), and append it at the end of annotations.
    3. Increment index by one and jump to the step labelled process an rtc child.
  9. If current automatic annotation nodes is empty, set current automatic annotation range start to the value of index.
  10. Append current child at the end of current automatic annotation nodes.
  11. Increment index by one and jump to the step labelled process an rtc child.

When the steps above say to commit an automatic annotation, it means to run the following steps at that point in the algorithm:

  1. If current automatic annotation nodes is empty, abort these steps.
  2. If current automatic annotation nodes contains nodes that are not Text nodes, or Text nodes that are not inter-element white space, then create a new DOM range whose start is the boundary point (root, current automatic annotation range start) and whose end is the boundary point (root, index), and append it at the end of annotations.
  3. Let current automatic annotation nodes be an empty list of DOM nodes.
  4. Let current automatic annotation range start be null.

4.5.14. The rp element

Categories:
None.
Contexts in which this element can be used:
As a child of a ruby or rtc element, either immediately before or immediately after an rt or rtc element, but not between rt elements.
Content model:
Phrasing content.
Tag omission in text/html:
An rp element’s end tag may be omitted if the rp element is immediately followed by an rb, rt, rtc or rp element, or if there is no more content in the parent element.
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The rp element is used to provide fallback text to be shown by user agents that don’t support ruby annotations. One widespread convention is to provide parentheses around the ruby text component of a ruby annotation.

The contents of the rp elements are typically not displayed by user agents which do support ruby annotations

An rp element that is a child of a ruby element represents nothing. An rp element whose parent element is not a ruby element represents its children.

The example shown previously, in which each ideograph in the text 漢字 is annotated with its phonetic reading, could be expanded to use rp so that in legacy user agents the readings are in parentheses (please note that white space has been introduced into this example in order to make it more readable):

...<ruby><rb></rb>
  <rp> (</rp>
  <rt>かん</rt>
  <rt></rt>
  <rp>) </rp>
</ruby>
...

In conforming user agents the rendering would be as above, but in user agents that do not support ruby, the rendering would be:

... 漢字 (かんじ) ...

When there are multiple annotations for a segment, rp elements can also be placed between the annotations. Here is another copy of an earlier contrived example showing some symbols with names given in English and French using double-sided annotations, but this time with rp elements as well:

<ruby><rp>: </rp><rt>Heart</rt><rp>, </rp><rtc><rt lang="fr">Cœur</rt></rtc><rp>.</rp><rp>: </rp><rt>Shamrock</rt><rp>, </rp><rtc><rt lang="fr">Trèfle</rt></rtc><rp>.</rp><rp>: </rp><rt>Star</rt><rp>, </rp><rtc><rt lang="fr">Étoile</rt></rtc><rp>.</rp>
</ruby>

This would make the example render as follows in non-ruby-capable user agents:

♥: Heart, Cœur.
☘: Shamrock, Trèfle.
✶: Star, Étoile.

4.5.15. The data element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
value - Machine-readable value
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
interface HTMLDataElement : HTMLElement {
  attribute DOMString value;
};

The data element represents its contents, along with a machine-readable form of those contents in the value attribute.

The value attribute must be present. Its value must be a representation of the element’s contents in a machine-readable format.

When the value is a date or time, the more specific time element should be used instead.

The element can be used to provide a machine-readable value for data processors, including scripts running in the page, alongside a more human-readable value that is rendered in a Web browser. Typical uses include microdata and microformats. [microdata][microformats]

<h1 itemscope>
 <data itemprop="product-id" value="9678AOU879">The Instigator 2000</data>
</h1>

The value IDL attribute must reflect the content attribute of the same name.

4.5.16. The time element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
If the element has a datetime attribute: Phrasing content.
Otherwise: Text , but must match requirements described in prose below.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
datetime - Machine-readable value
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
interface HTMLTimeElement : HTMLElement {
  attribute DOMString dateTime;
};

The time element represents its contents, along with a machine-readable form of those contents in the datetime attribute. The kind of content is limited to various kinds of dates, times, time-zone offsets, and durations, as described below.

The datetime attribute may be present. If present, its value must be a representation of the element’s contents in a machine-readable format.

A time element that does not have a datetime content attribute must not have any element descendants.

The datetime value of a time element is the value of the element’s datetime content attribute, if it has one, otherwise the child text content of the time element.

The datetime value of a time element must match one of the following syntaxes.

A valid month string
<time>2011-11</time>
A valid date string
<time>2011-11-18</time>
A valid yearless date string
<time>11-18</time>
A valid time string
<time>09:54</time>
<time>09:54:39</time>
<time>09:54:39.929</time>
A valid floating date and time string
<time>2011-11-18T14:54</time>
<time>2011-11-18T14:54:39</time>
<time>2011-11-18T14:54:39.929</time>
<time>2011-11-18 14:54</time>
<time>2011-11-18 14:54:39</time>
<time>2011-11-18 14:54:39.929</time>

Times with dates but without a time zone offset are useful for specifying events that are observed at the same specific time in each time zone, throughout a day. For example, the 2020 new year is celebrated at 2020-01-01 00:00 in each time zone, not at the same precise moment across all time zones. For events that occur at the same time across all time zones, for example a videoconference meeting, a valid global date and time string is likely more useful.

A valid time-zone offset string
<time>Z</time>
<time>+0000</time>
<time>+00:00</time>
<time>-0800</time>
<time>-08:00</time>

For times without dates (or times referring to events that recur on multiple dates), specifying the geographic location that controls the time is usually more useful than specifying a time zone offset, because geographic locations change time zone offsets with daylight savings time. In some cases, geographic locations even change time zone, e.g., when the boundaries of those time zones are redrawn, as happened with Samoa at the end of 2011. There exists a time zone database that describes the boundaries of time zones and what rules apply within each such zone, known as the time zone database. [TZDATABASE]

A valid global date and time string
<time>2011-11-18T14:54Z</time>
<time>2011-11-18T14:54:39Z</time>
<time>2011-11-18T14:54:39.929Z</time>
<time>2011-11-18T14:54+0000</time>
<time>2011-11-18T14:54:39+0000</time>
<time>2011-11-18T14:54:39.929+0000</time>
<time>2011-11-18T14:54+00:00</time>
<time>2011-11-18T14:54:39+00:00</time>
<time>2011-11-18T14:54:39.929+00:00</time>
<time>2011-11-18T06:54-0800</time>
<time>2011-11-18T06:54:39-0800</time>
<time>2011-11-18T06:54:39.929-0800</time>
<time>2011-11-18T06:54-08:00</time>
<time>2011-11-18T06:54:39-08:00</time>
<time>2011-11-18T06:54:39.929-08:00</time>
<time>2011-11-18 14:54Z</time>
<time>2011-11-18 14:54:39Z</time>
<time>2011-11-18 14:54:39.929Z</time>
<time>2011-11-18 14:54+0000</time>
<time>2011-11-18 14:54:39+0000</time>
<time>2011-11-18 14:54:39.929+0000</time>
<time>2011-11-18 14:54+00:00</time>
<time>2011-11-18 14:54:39+00:00</time>
<time>2011-11-18 14:54:39.929+00:00</time>
<time>2011-11-18 06:54-0800</time>
<time>2011-11-18 06:54:39-0800</time>
<time>2011-11-18 06:54:39.929-0800</time>
<time>2011-11-18 06:54-08:00</time>
<time>2011-11-18 06:54:39-08:00</time>
<time>2011-11-18 06:54:39.929-08:00</time>

Times with dates and a time zone offset are useful for specifying specific events, or recurring virtual events where the time is not anchored to a specific geographic location. For example, the precise time of an asteroid impact, or a particular meeting in a series of meetings held at 1400 UTC every day, regardless of whether any particular part of the world is observing daylight savings time or not. For events where the precise time varies by the local time zone offset of a specific geographic location, a valid floating date and time string combined with that geographic location is likely more useful.

A valid week string
<time>2011-W47</time>
Four ASCII digits , at least one of which is not U+0030 DIGIT ZERO (0)
<time>2011</time>
<time>0001</time>
A valid duration string
<time>PT4H18M3S</time>
<time>4h 18m 3s</time>

Many of the preceding valid syntaxes describe "floating" date and/or time values (they do not include a time-zone offset). Care is needed when converting floating time values to or from global ("incremental") time values (e.g., JavaScript’s Date object). In many cases, an implicit time-of-day and time zone are used in the conversion and may result in unexpected changes to the value of the date itself. [TIMEZONE]

The machine-readable equivalent of the element’s contents must be obtained from the element’s datetime value by using the following algorithm:

  1. If parsing a month string from the element’s datetime value returns a month, that is the machine-readable equivalent; abort these steps.
  2. If parsing a date string from the element’s datetime value returns a date, that is the machine-readable equivalent; abort these steps.
  3. If parsing a yearless date string from the element’s datetime value returns a yearless date, that is the machine-readable equivalent; abort these steps.
  4. If parsing a time string from the element’s datetime value returns a time, that is the machine-readable equivalent; abort these steps.
  5. If parsing a floating date and time string from the element’s datetime value returns a floating date and time, that is the machine-readable equivalent; abort these steps.
  6. If parsing a time-zone offset string from the element’s datetime value returns a time-zone offset, that is the machine-readable equivalent; abort these steps.
  7. If parsing a floating date and time string from the element’s datetime value returns a global date and time, that is the machine-readable equivalent; abort these steps.
  8. If parsing a week string from the element’s datetime value returns a week, that is the machine-readable equivalent; abort these steps.
  9. If the element’s datetime value consists of only ASCII digits, at least one of which is not U+0030 DIGIT ZERO (0), then the machine-readable equivalent is the base-ten interpretation of those digits, representing a year; abort these steps.
  10. If parsing a duration string from the element’s datetime value returns a duration, that is the machine-readable equivalent; abort these steps.
  11. There is no machine-readable equivalent.

The algorithms referenced above are intended to be designed such that for any arbitrary string s, only one of the algorithms returns a value. A more efficient approach might be to create a single algorithm that parses all these data types in one pass; developing such an algorithm is left as an exercise to the reader.

The dateTime IDL attribute must reflect the element’s datetime content attribute.

The time element can be used to encode dates, for example in microformats. The following shows a hypothetical way of encoding an event using a variant on hCalendar that uses the time element:
<div class="vevent">
  <a class="url" href="https://conference.example.com/">https://conference.example.com/</a>
  <span class="summary">Web 3.0 Conference</span>:
  <time class="dtstart" datetime="2025-10-05">October 5</time> -
  <time class="dtend" datetime="2025-10-07">7</time>, at the <span class="location">Argent Hotel, San Francisco, CA</span>
</div>
Here, a fictional RDFa vocabulary based on the Atom vocabulary is used with the time element to mark up a blog post’s publication date [html-rdfa].
<article vocab="https://n.example.org/" typeof="rfc4287">
  <h1 property="title">Big tasks</h1>
  <footer>Published <time property="published" datetime="2009-08-29">two days ago</time>.</footer>
  <p property="content">Today, I went out and bought a bike for my kid.</p>
</article>
In this example, another article’s publication date is marked up using time, this time using the schema.org vocabulary:
<article typeof="schema:BlogPosting">
  <h1 property="schema:headline">Small tasks</h1>
  <footer>Published <time property="schema:datePublished" datetime="2009-08-30">yesterday</time>.</footer>
  <p property="schema:articleBody">I put a bike bell on his bike.</p>
</article>
In the following snippet, the time element is used to encode a date in the ISO8601 format, for later processing by a script:
<p>Our first date was <time datetime="2006-09-23">a Saturday</time>.</p>

In this second snippet, the value includes a time:

<p>We stopped talking at <time datetime="2006-09-24T05:00-07:00">5am the next morning</time>.</p>

A script loaded by the page (and thus privy to the page’s internal convention of marking up dates and times using the time element) could scan through the page and look at all the time elements therein to create an index of dates and times.

For example, this element conveys the string "Friday" with the additional semantic that the 18th of November 2011 is the meaning that corresponds to "Friday":
Today is <time datetime="2011-11-18">Friday</time>.
In this example, a specific time in the Pacific Standard Time timezone is specified:
Your next meeting is at <time datetime="2011-11-18T15:00-08:00">3pm</time>.

4.5.17. The code element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The code element represents a fragment of computer code. This could be an XML element name, a file name, a computer program, or any other string that a computer would recognize.

There is no formal way to indicate the language of computer code being marked up. Authors who wish to mark code elements with the language used, e.g., so that syntax highlighting scripts can use the right rules, can use the class attribute, e.g., by adding a class prefixed with "language-" to the element.

The following example shows how the element can be used in a paragraph to mark up element names and computer code, including punctuation.
<p>The <code>code</code> element represents a fragment of computer code.</p>

<p>When you call the <code>activate()</code> method on the <code>robotSnowman</code> object, the eyes glow.</p>

<p>The example below uses the <code>begin</code> keyword to indicate the start of a statement block. It is paired with an <code>end</code> keyword, which is followed by the <code>.</code> punctuation character (full stop) to indicate the end of the program.</p>
The following example shows how a block of code could be marked up using the pre and code elements.
<pre><code class="language-pascal">var i: Integer;
begin
    i := 1;
end.</code></pre>

A class is used in that example to indicate the language used.

See the pre element for more details.

4.5.18. The var element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The var element represents a variable. This could be an actual variable in a mathematical expression or programming context, an identifier representing a constant, a symbol identifying a physical quantity, a function parameter, or just be a term used as a placeholder in prose.

In the paragraph below, the letter "n" is being used as a variable in prose:
<p>If there are <var>n</var> pipes leading to the ice cream factory then I expect at <em>least</em> <var>n</var> flavors of ice cream to be available for purchase!</p>

For mathematics, in particular for anything beyond the simplest of expressions, MathML is more appropriate. However, the var element can still be used to refer to specific variables that are then mentioned in MathML expressions.

In this example, an equation is shown, with a legend that references the variables in the equation. The expression itself is marked up with MathML, but the variables are mentioned in the figure’s legend using var.
<figure>
  <math>
    <mi>a</mi>
    <mo>=</mo>
    <msqrt>
      <msup><mi>b</mi><mn>2</mn></msup>
      <mi>+</mi>
      <msup><mi>c</mi><mn>2</mn></msup>
    </msqrt>
  </math>
  <figcaption>
    Using Pythagoras' theorem to solve for the hypotenuse <var>a</var> of a triangle with sides <var>b</var> and <var>c</var>
  </figcaption>
</figure>
Here, the equation describing mass-energy equivalence is used in a sentence, and the var element is used to mark the variables and constants in that equation:
<p>Then he turned to the blackboard and picked up the chalk. After a few moment’s thought, he wrote <var>E</var> = <var>m</var> <var>c</var><sup>2</sup>. The teacher looked pleased.</p>

4.5.19. The samp element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The samp element represents sample or quoted output from another program or computing system.

See the pre and kbd elements for more details.

This element can be contrasted with the output element, which can be used to provide immediate output in a Web application.

This example shows the samp element being used inline:
<p>The computer said <samp>Too much cheese in tray two</samp> but I didn’t know what that meant.</p>
This second example shows a block of sample output. Nested samp and kbd elements allow for the styling of specific elements of the sample output using a style sheet. There’s also a few parts of the samp that are annotated with even more detailed markup, to enable very precise styling. To achieve this, span elements are used.
<pre><samp><span class="prompt">jdoe@mowmow:~$</span> <kbd>ssh demo.example.com</kbd>
Last login: Tue Apr 12 09:10:17 2005 from mowmow.example.com on pts/1
Linux demo 2.6.10-grsec+gg3+e+fhs6b+nfs+gr0501+++p3+c4a+gr2b-reslog-v6.189 #1 SMP Tue Feb 1 11:22:36 PST 2005 i686 unknown

<span class="prompt">jdoe@demo:~$</span> <span class="cursor">_</span></samp></pre>

4.5.20. The kbd element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The kbd element represents user input (typically keyboard input, although it may also be used to represent other input, such as voice commands).

When the kbd element is nested inside a samp element, it represents the input as it was echoed by the system.

When the kbd element contains a samp element, it represents input based on system output.

When the kbd element is nested inside another kbd element, it represents an actual key or other single unit of input as appropriate for the input mechanism.

Here the kbd element is used to indicate keys to press:
<p>To make George eat an apple, press <kbd><kbd>Shift</kbd>+<kbd>F3</kbd></kbd></p>

In this second example, the user is told to pick a particular menu item. The outer kbd element marks up a block of input, with the inner kbd elements representing each individual step of the input, and the samp elements inside them indicating that the steps are input based on something being displayed by the system, in this case menu labels:

<p>To make George eat an apple, select
    <kbd><kbd><samp>File</samp></kbd>|<kbd><samp>Eat Apple...</samp></kbd></kbd>
</p>

Such precision isn’t necessary; the following is equally fine:

<p>To make George eat an apple, select <kbd>File | Eat Apple...</kbd></p>

4.5.21. The sub and sup elements

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Use HTMLElement.

The sub element represents a subscript, and the sup element represents a superscript.

These elements must be used only to mark up typographical conventions with specific meanings, not for typographical presentation for presentation’s sake. For example, it would be inappropriate for the sub and sup elements to be used in the name of the LaTeX document preparation system. In general, authors should use these elements only if the absence of those elements would change the meaning of the content.

In certain languages, superscripts are part of the typographical conventions for some abbreviations.

<p>The most intelligent women are
<span lang="fr"><abbr>M<sup>lle</sup></abbr> de Beauvoir</span> and
<span lang="fr"><abbr>M<sup>me</sup></abbr> Colette</span>.</p>

The sub element can be used inside a var element, for variables that have subscripts.

Here, the sub element is used to represent the subscript that identifies the variable in a family of variables:
<p>The coordinate of the <var>i</var>th point is (<var>x<sub><var>i</var></sub></var>, <var>y<sub><var>i</var></sub></var>).
For example, the 10th point has coordinate (<var>x<sub>10</sub></var>, <var>y<sub>10</sub></var>).</p>

Mathematical expressions often use subscripts and superscripts. Authors are encouraged to use MathML for marking up mathematics, but authors may opt to use sub and sup if detailed mathematical markup is not desired. [MATHML]

<var>E</var>=<var>m</var><var>c</var><sup>2</sup>

f(<var>x</var>, <var>n</var>) = log<sub>4</sub><var>x</var><sup><var>n</var></sup>

4.5.22. The i element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The i element represents a span of text in an alternate voice or mood, or otherwise offset from the normal prose in a manner indicating a different quality of text, such as a taxonomic designation, a technical term, an idiomatic phrase from another language, transliteration, a thought, or a ship name in Western texts.

Terms in languages different from the main text should be annotated with lang attributes (or, in XML, lang attributes in the XML namespace).

The examples below show uses of the i element:
<p>The <i class="taxonomy">Felis silvestris catus</i> is cute.</p>
<p>The term <i>prose content</i> is defined above.</p>
<p>There is a certain <i lang="fr">je ne sais quoi</i> in the air.</p>

In the following example, a dream sequence is marked up using i elements.

<p>Raymond tried to sleep.</p>
<p><i>The ship sailed away on Thursday</i>, he dreamt. <i>The ship had many people aboard, including a beautiful princess called Carey. He watched her, day-in, day-out, hoping she would notice him, but she never did.</i></p>
<p><i>Finally one night he picked up the courage to speak with her—</i></p>
<p>Raymond woke with a start as the fire alarm rang out.</p>

Authors are encouraged to consider whether other elements might be more applicable than the i element, for instance the em element for marking up stress emphasis, or the dfn element to mark up the defining instance of a term.

Style sheets can be used to format i elements, just like any other element can be restyled. Thus, it is not the case that content in i elements will necessarily be italicized.

4.5.23. The b element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The b element represents a span of text to which attention is being drawn for utilitarian purposes without conveying any extra importance and with no implication of an alternate voice or mood, such as key words in a document abstract, product names in a review, actionable words in interactive text-driven software, or an article lede.

The following example shows a use of the b element to highlight key words without marking them up as important:
<p>The <b>frobonitor</b> and <b>barbinator</b> components are fried.</p>
In the following example, objects in a text adventure are highlighted as being special by use of the b element.
<p>You enter a small room. Your <b>sword</b> glows brighter. A <b>rat</b> scurries past the corner wall.</p>
Another case where the b element is appropriate is in marking up the lede (or lead) sentence or paragraph. The following example shows how a BBC article about kittens adopting a rabbit as their own could be marked up:
<article>
  <h2>Kittens 'adopted' by pet rabbit</h2>
  <p><b class="lede">Six abandoned kittens have found an unexpected new mother figure — a pet rabbit.</b></p>
  <p>Veterinary nurse Melanie Humble took the three-week-old kittens to her Aberdeen home.</p>
  ...
</article>

As with the i element, authors can use the class attribute on the b element to identify why the element is being used, so that if the style of a particular use is to be changed at a later date, the author doesn’t have to go through annotating each use.

The b element should be used as a last resort when no other element is more appropriate. In particular, headings should use the h1 to h6 elements, stress emphasis should use the em element, importance should be denoted with the strong element, and text marked or highlighted should use the mark element.

The following would be incorrect usage:
<p><b>WARNING!</b> Do not frob the barbinator!</p>

In the previous example, the correct element to use would have been strong, not b.

Style sheets can be used to format b elements, just like any other element can be restyled. Thus, it is not the case that content in b elements will necessarily be boldened.

4.5.24. The u element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The u element represents a span of text with a non-textual annotation, such as labeling a proper name in Chinese text, a surname, or text as being misspelt.

Underlining as a stylistic presentation is a convention in some cases:
<p>Among others, Japanese, Hungarian and Chinese names are generally written with the family name first: <u>Wu</u> Xiaoqian.</p>
and when the sun rises over the trees of fire, there are no other <u class="spelling">incediaris</u> as powerful in this collection of dwelling
<p>The <u>see</u> is full of fish</p>

In most cases, another element is likely to be more appropriate: for marking stress emphasis, the em element should be used; for marking key words or phrases either the b element or the mark element should be used, depending on the context; for marking book titles, the cite element should be used; for labeling text with explicit textual annotations, the ruby element should be used; for technical terms, taxonomic designation, transliteration, a thought, or for labeling ship names in Western texts, the i element should be used.

The default rendering of the u element in visual presentations clashes with the conventional rendering of hyperlinks (underlining). Authors are encouraged to avoid using the u element where it could be confused for a hyperlink.

4.5.25. The mark element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The mark element represents a run of text in one document marked or highlighted for reference purposes, due to its relevance in another context. When used in a quotation or other block of text referred to from the prose, it indicates a highlight that was not originally present but which has been added to bring the reader’s attention to a part of the text that might not have been considered important by the original author when the block was originally written, but which is now under previously unexpected scrutiny. When used in the main prose of a document, it indicates a part of the document that has been highlighted due to its likely relevance to the user’s current activity.

This example shows how the mark element can be used to bring attention to a particular part of a quotation:
<p lang="en-US">Consider the following quote:</p>
<blockquote lang="en-GB">
  <p>Look around and you will find, no-one’s really <mark>colour</mark> blind.</p>
</blockquote>
<p lang="en-US">As we can tell from the <em>spelling</em> of the word, the person writing this quote is clearly not American.</p>

(If the goal was to mark the element as misspelt, however, the u element, possibly with a class, would be more appropriate.)

Another example of the mark element is highlighting parts of a document that are matching some search string. If someone looked at a document, and the server knew that the user was searching for the word "kitten", then the server might return the document with one paragraph modified as follows:
<p>I also have some <mark>kitten</mark>s who are visiting me these days. They’re really cute. I think they like my garden! Maybe I should adopt a <mark>kitten</mark>.</p>
In the following snippet, a paragraph of text refers to a specific part of a code fragment.
<p>The highlighted part below is where the error lies:</p>
<pre><code>var i: Integer;
begin
    i := <mark>1.1</mark>;
end.</code></pre>

This is separate from syntax highlighting, for which span is more appropriate. Combining both, one would get:

<p>The highlighted part below is where the error lies:</p>
<pre><code><span class="keyword">var</span> <span class="ident">i</span>: <span class="type">Integer</span>;
<span class="keyword">begin</span>
    <span class="ident">i</span> := <span class="literal"><mark>1.1</mark></span>;
<span class="keyword">end</span>.</code></pre>
This is another example showing the use of mark to highlight a part of quoted text that was originally not emphasized. In this example, common typographic conventions have led the author to explicitly style mark elements in quotes to render in italics.
<head>
  <style>
    blockquote mark, q mark {
      font: inherit;
      font-style: italic;
      text-decoration: none;
      background: transparent;
      color: inherit;
    }

    .bubble em {
      font: inherit;
      font-size: larger;
      text-decoration: underline;
    }
  </style>
</head>
<body>
  <article>
    <h1>She knew</h1>
    <p>Did you notice the subtle joke in the joke on panel 4?</p>
    <blockquote>
      <p class="bubble">I didn’t <em>want</em> to believe. <mark>Of course on some level I realized it was a known-plaintext attack.</mark> But I couldn’t admit it until I saw for myself.</p>
    </blockquote>
    <p>(Emphasis mine.) I thought that was great. It’s so pedantic, yet it explains everything neatly.</p>
  </article>
</body>

Note, incidentally, the distinction between the em element in this example, which is part of the original text being quoted, and the mark element, which is highlighting a part for comment.

The following example shows the difference between denoting the importance of a span of text (strong) as opposed to denoting the relevance of a span of text (mark). It is an extract from a textbook, where the extract has had the parts relevant to the exam highlighted. The safety warnings, important though they may be, are apparently not relevant to the exam.
<h3>Wormhole Physics Introduction</h3>

<p><mark>A wormhole in normal conditions can be held open for a maximum of just under 39 minutes.</mark> Conditions that can increase the time include a powerful energy source coupled to one or both of the gates connecting the wormhole, and a large gravity well (such as a black hole).</p>

<p><mark>Momentum is preserved across the wormhole. Electromagnetic radiation can travel in both directions through a wormhole, but matter cannot.</mark></p>

<p>When a wormhole is created, a vortex normally forms. <strong>Warning: The vortex caused by the wormhole opening will annihilate anything in its path.</strong> Vortexes can be avoided when using sufficiently advanced dialing technology.</p>

<p><mark>An obstruction in a gate will prevent it from accepting a wormhole connection.</mark></p>

4.5.26. The bdi element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Also, the dir global attribute has special semantics on this element.
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The bdi element represents a span of text that is to be isolated from its surroundings for the purposes of bidirectional text formatting. [BIDI]

The dir global attribute defaults to auto on this element (it never inherits from the parent element like with other elements).

This element has rendering requirements involving the bidirectional algorithm.

This element is especially useful when embedding user-generated content with an unknown directionality.

In this example, usernames are shown along with the number of posts that the user has submitted. If the bdi element were not used, the username of the Arabic user would end up confusing the text (the bidirectional algorithm would put the colon and the number "3" next to the word "User" rather than next to the word "posts").

<ul>
  <li>User <bdi>jcranmer</bdi>: 12 posts.</li>
  <li>User <bdi>hober</bdi>: 5 posts.</li>
  <li>User <bdi><bdo dir="rtl">إيان</bdo></bdi>: 3 posts.</li>
</ul>
When using the bdi element, the username acts as expected.
The bdi element is a shorthand for dir with a value of auto, so the dir attribute can be applied to another element to achieve the same result.

For example, the b element may be used to draw attention to part of the content:

If the bdi element were to be replaced by a b element, the username would confuse the bidirectional algorithm and the third bullet would end up saying "User 3 :", followed by the Arabic name (right-to-left), followed by "posts" and a period.

In this case the bdi and b elements could both be used, but where there is an existing element available, the shortest way to achieve the same result is to apply the dir attribute directly to the element:

<ul>
  <li>User <b dir="auto">jcranmer</b>: 12 posts.</li>
  <li>User <b dir="auto">hober</b>: 5 posts.</li>
  <li>User <b dir="auto">إيان</b>: 3 posts.</li>
</ul>

When there is no existing element available, the bdi element can be used to achieve the same effect.

<ul>
  <li>User <bdi>jcranmer</bdi>: 12 posts.</li>
  <li>User <bdi>hober</bdi>: 5 posts.</li>
  <li>User <bdi>إيان</bdi>: 3 posts.</li>
</ul>

4.5.27. The bdo element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Also, the dir global attribute has special semantics on this element.
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The bdo element represents explicit text directionality formatting control for its children. It allows authors to override the Unicode bidirectional algorithm while explicitly specifying a direction override. [BIDI]

Authors must specify the dir attribute on this element, with the value ltr to specify a left-to-right override and with the value rtl to specify a right-to-left override. The auto value must not be specified.

This element has rendering requirements involving the bidirectional algorithm.

The effect of using the bdo element is to completely disable the bidirectional algorithm. This means that characters within the bdo element will be displayed exactly as stored in memory and in the direction specified. This is different than the bdi element, where the characters will be re-ordered and re-arranged according to the directional algorithm. Use the bdo element only if you specifically want to disable the bidirectional algorithm completely for that text.

The following example shows the difference in rendering between the bdi and bdo element.
<bdi dir="rtl">שלום Majima! מה שלומך היום?</bdi>
<bdo dir="rtl">שלום Majima! מה שלומך היום?</bdo>
<bdo dir="ltr">שלום Majima! מה שלומך היום?</bdo>

שלום Majima! מה שלומך היום?
שלום Majima! מה שלומך היום?
שלום Majima! מה שלומך היום?

In this example, you can see the latin characters in the bdi element being rendered from left-to-right, whereas the rest of the text being rendered right-to-left. This is because the bidirectional algorithm recognizes latin characters and automatically applies a left-to-right rendering for just those characters.

In the bdo text, the bidirectional algorithm is disabled. So the text will be rendered character by character in the direction specified, in a sequential order corresponding to that of the characters in memory.

4.5.28. The span element

Categories:
Flow content.
Phrasing content.
Palpable content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Phrasing content.
Tag omission in text/html:
Neither tag is omissible
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
interface HTMLSpanElement : HTMLElement {};

The span element doesn’t mean anything on its own, but can be useful when used together with the Global attributes, e.g., class, lang, or dir. It represents its children.

In this example, a code fragment is marked up using span elements and class attributes so that its keywords and identifiers can be color-coded from CSS:
<pre>
  <code class="lang-c">
    <span class="keyword">for</span> (<span class="ident">j</span> = 0; <span class="ident">j</span> &lt; 256; <span class="ident">j</span>++) {
      <span class="ident">i_t3</span> = (<span class="ident">i_t3</span> &amp; 0x1ffff) | (<span class="ident">j</span> &lt;&lt; 17);
      <span class="ident">i_t6</span> = (((((((<span class="ident">i_t3</span> >> 3) ^ <span class="ident">i_t3</span>) >> 1) ^ <span class="ident">i_t3</span>) >> 8) ^ <span class="ident">i_t3</span>) >> 5) &amp; 0xff;
      <span class="keyword">if</span> (<span class="ident">i_t6</span> == <span class="ident">i_t1</span>)
        <span class="keyword">break</span>;
    }
</code>

4.5.29. The br element

Categories:
Flow content.
Phrasing content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Nothing.
Tag omission in text/html:
No end tag
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
interface HTMLBRElement : HTMLElement {};

The br element represents a line break.

While line breaks are usually represented in visual media by physically moving subsequent text to a new line, a style sheet or user agent would be equally justified in causing line breaks to be rendered in a different manner, for instance as green dots, or as extra spacing.

br elements must be used only for line breaks that are actually part of the content, as in poems or addresses.

The following example is correct usage of the br element:
<p>P. Sherman<br>
42 Wallaby Way<br>
Sydney</p>

br elements must not be used for separating thematic groups in a paragraph.

The following examples are non-conforming, as they abuse the br element:
<p><a ...>34 comments.</a><br>
<a ...>Add a comment.</a></p>
<p><label>Name: <input name="name"></label><br>
<label>Address: <input name="address"></label></p>

Here are alternatives to the above, which are correct:

<p><a ...>34 comments.</a></p>
<p><a ...>Add a comment.</a></p>
<p><label>Name: <input name="name"></label></p>
<p><label>Address: <input name="address"></label></p>

If a paragraph consists of nothing but a single br element, it represents a placeholder blank line (e.g., as in a template). Such blank lines must not be used for presentation purposes.

Any content inside br elements must not be considered part of the surrounding text.

This element has rendering requirements involving the bidirectional algorithm.

4.5.30. The wbr element

Categories:
Flow content.
Phrasing content.
Contexts in which this element can be used:
Where phrasing content is expected.
Content model:
Nothing.
Tag omission in text/html:
No end tag
Content attributes:
Global attributes
Allowed ARIA role attribute values:
Any role value.
Allowed ARIA state and property attributes:
Global aria-* attributes
Any aria-* attributes applicable to the allowed roles.
DOM interface:
Uses HTMLElement.

The wbr element represents a line break opportunity.

In the following example, someone is quoted as saying something which, for effect, is written as one long word. However, to ensure that the text can be wrapped in a readable fashion, the individual words in the quote are separated using a wbr element.
<p>So then he pointed at the tiger and screamed "there<wbr>is<wbr>no<wbr>way<wbr>you<wbr>are<wbr>ever<wbr>going<wbr>to<wbr>catch<wbr>me"!</p>
Here, especially long lines of code in a program listing have suggested wrapping points given using wbr elements.
<pre>
  Heading heading = Helm.HeadingFactory(HeadingCoordinates[1], <wbr>HeadingCoordinates[2], <wbr>HeadingCoordinates[3], <wbr>HeadingCoordinates[4]);
  Course course = Helm.CourseFactory(Heading, <wbr>Maps.MapFactoryFromHeading(heading), <wbr>Speeds.GetMaximumSpeed().ConvertToWarp());
</pre>

Any content inside wbr elements must not be considered part of the surrounding text.

var wbr = document.createElement("wbr");
wbr.textContent = "This is wrong";
document.body.appendChild(wbr);

This element has rendering requirements involving the bidirectional algorithm.

4.5.31. Usage summary

This section is non-normative.

Element Purpose Example
a Hyperlinks
Visit my <a href="drinks.html">drinks</a> page.
em Stress emphasis
I must say I <em>adore</em> lemonade.
strong Importance
This tea is <strong>very hot</strong>.
small Side comments
These grapes are made into wine. <small>Alcohol is addictive.</small>
s Inaccurate text
Price: <s>£4.50</s> £2.00!
cite Titles of works
The case <cite>Hugo v. Danielle</cite> is relevant here.
q Quotations
The judge said <q>You can drink water from the fish tank</q> but advised against it.
dfn Defining instance
The term <dfn>organic food</dfn> refers to food produced without synthetic chemicals.
abbr Abbreviations
Organic food in Ireland is certified by the <abbr title="Irish Organic Farmers and Growers Association">IOFGA</abbr>.
ruby, rb, rp, rt, rtc Ruby annotations
<ruby> <rb>OJ <rp>(<rtc><rt>Orange Juice</rtc><rp>)</ruby>
data Machine-readable equivalent
Available starting today! <data value="UPC:022014640201">North Coast Organic Apple Cider</data>
time Machine-readable equivalent of date- or time-related data
Available starting on <time datetime="2011-11-18">November 18th</time>!
code Computer code
The <code>fruitdb</code> program can be used for tracking fruit production.
var Variables
If there are <var>n</var> fruit in the bowl, at least <var>n</var>÷2 will be ripe.
samp Computer output
The computer said <samp>Unknown error -3</samp>.
kbd User input
Hit <kbd>F1</kbd> to continue.
sub Subscripts
Water is H<sub>2</sub>O.
sup Superscripts
The Hydrogen in heavy water is usually <sup>2</sup>H.
i Alternative voice
Lemonade consists primarily of <i>Citrus limon</i>.
b Keywords
Take a <b>lemon</b> and squeeze it with a <b>juicer</b>.
u Annotations
The mixture of apple juice and <u class="spelling">eldeflower</u> juice is very pleasant.
mark Highlight
Elderflower cordial, with one <mark>part</mark> cordial to ten <mark>part</mark>s water, stands a<mark>part</mark> from the rest.
bdi Text directionality isolation
The recommended restaurant is <bdi lang="">My Juice Café (At The Beach)</bdi>.
bdo Text directionality formatting
The proposal is to write English, but in reverse order. "Juice" would become "<bdo dir="rtl">Juice</bdo>"
span Other
In French we call it <span lang="fr">sirop de sureau</span>.
br Line break
Simply Orange Juice Company<br>Apopka, FL 32703<br>U.S.A.
wbr Line breaking opportunity
www.simply<wbr>orange<wbr>juice.com

4.4 Grouping contentTable of contents4.6 Edits